Sandblasted vs. Laser Engraved Glass

Engraved, etched, sandblasted: all three words are used for designs on glass, but they aren't made the same way. Here's how sandblasting, the method we use for every Gift a Glass piece, compares with laser engraving.

How sandblasting works

  1. A stencil is cut. The design is cut into a protective stencil that is pressed onto the glass.
  2. The glass is blasted. Fine abrasive is blown at high pressure over the stencil. Where the stencil is open, it wears away the surface of the glass; everywhere else is protected.
  3. The stencil comes off. What's left is the design, cut into the glass with a smooth, even frosted finish.

Because each stencil is applied and blasted by hand, every glass is made individually.

How laser engraving works

A laser marks the glass by heating tiny points on its surface. It's fast and good for very fine detail, but the mark is usually shallow and can look slightly speckled or chalky up close.

Side by side

Sandblasted Laser engraved
Depth Cut into the glass; you can feel it Usually a shallow surface mark
Look Smooth, even frosted finish Can look grainy or speckled up close
Durability Permanent; won't fade, peel or wash off Permanent, but shallow marks can look faint
Dishwasher Yes, the design won't wash away Usually yes
Made By hand, one glass at a time By machine

Which should you choose?

For a gift that gets used every day and goes through the dishwasher, a deep sandblasted design holds up and looks clean for years. That's why we've sandblasted every glass since 2016.

Browse our designs or ask about a custom or bulk order.